Aircraft Communication Systems Other

Chapter 23 - Communication (Aircraft Systems)

25 questions
Answer key

Exam info

Subject
Aircraft Communication Systems
Exam type
Other
Questions
25
Answers
✓ With explanations

Questions (25)

  1. Q 1.

    MARK THE CORRECT STATEMENT:

    • A.

      HF1 can transmit while HF2 is receiving.

    • B.

      VHF1 can transmit while VHF2 is receiving.

    • C.

      HF1 and HF2 can not receive at the same time.

  2. Q 2.

    FROM ONE OF AUDIO CONTROL PANELS:

    • A.

      We can select two HFs or VHFs in transmit mode if they have tuned to different frequencies.

    • B.

      We can select one radio system to transmit and INT square key.

    • C.

      We can not select two square keys.

  3. Q 3.

    UPON CHANGING THE HF FREQUENCY:

    • A.

      We can receive as soon as tuning elements are in HOME position.

    • B.

      We can transmit immediately.

    • C.

      We can only receive after completion of antenna coupler tuning.

  4. Q 4.

    TUNING ELEMENTS IN HF ANTENNA COUPLER ARE USED FOR:

    • A.

      Adjusting the output voltage level.

    • B.

      Limiting the output current to a safe level.

    • C.

      Matching the antenna impedance to the line impedance.

  5. Q 5.

    HF FAULT ANNUNCIATOR LIGHTS ON THE MTP ARE CONTROLLED BY:

    • A.

      HF antenna coupler.

    • B.

      HF transceiver.

    • C.

      Both HF antenna coupler and HF transceiver.

  6. Q 6.

    HOW MUCH IS THE NOMINAL OUTPUT POWER OF VHF TRANSCEIVER?

    • A.

      25 watt.

    • B.

      125 watt.

    • C.

      400 watt.

  7. Q 7.

    TO PRESERVE THE HF SYSTEM AGAINST LIGHTNING:

    • A.

      A lightning arrester is used.

    • B.

      The antenna is grounded at its upper end.

    • C.

      No need to any preparation for it because it's a notch antenna.

  8. Q 8.

    HF CONTROL PANEL FAULT IS INDICATED ON THE:

    • A.

      HF control panel.

    • B.

      HF transceiver.

    • C.

      Fault Annunciator light.

  9. Q 9.

    WHICH STATEMENT IS CORRECT?

    • A.

      Conversation audios are recorded on CVR and key events on DFDR.

    • B.

      Conversation audios are recorded on DFDR and key events on CVR.

    • C.

      Conversation audios and key events on CVR.

  10. Q 10.

    CALLING CHIMES ARE GENERATED IN:

    • A.

      Flight Warning Computer.

    • B.

      Electronic and relays boxes.

    • C.

      PA amplifier.

  11. Q 11.

    THE CHIME ACCOMPANYING A PILOT TO ATTENDANT CALL IS A:

    • A.

      Hi chime.

    • B.

      Hi/Low chime.

    • C.

      Low chime.

  12. Q 12.

    BUZZER SOUNDS (FOR CALLING PILOT) ARE GENERATED IN:

    • A.

      Flight Warning Computer.

    • B.

      Electronic and relays boxes.

    • C.

      PA amplifier.

  13. Q 13.

    SELCAL TEST SWITCH IS LOCATED ON THE:

    • A.

      Selcal front panel.

    • B.

      "Avionic sys test" panel on MTP.

    • C.

      On both selcal front panel and "Avionic sys test" panel on MTP.

  14. Q 14.

    THE COCKPIT CALL BUTTON ON THE GROUND POWER RECEPTACLE PANEL IS PRESSED. THIS WILL BRING IN THE COCKPIT:

    • A.

      The MECH CALL light and a Hi/Low chime.

    • B.

      The MECH CALL light and an intermittent buzzer sound.

    • C.

      The MECH CALL light and a one-second buzzer sound.

  15. Q 15.

    WHICH OF THE AUDIO INPUTS TO PA AMPLIFIER HAS THE HIGHER PRIORITY?

    • A.

      Flight crew stations audio.

    • B.

      Emergency announcement.

    • C.

      Attendant stations.

  16. Q 16.

    TO ANNOUNCE THROUGH THE PA, WHICH STATEMENT IS WRONG?

    • A.

      The pilot selects EMER PA switch in ON and uses BOOM/MASK mic.

    • B.

      The pilot selects PA square key on ACP and uses handset common to CAB/SVC INT.

    • C.

      The pilot selects PA pushbutton on the overhead panel in on and uses handset common to CAB/SVC INT.

  17. Q 17.

    THE INPUT LINE TO THE PA AMPLIFIER TO INCREASE THE GAIN BY 6 DB COMES FROM:

    • A.

      CVR.

    • B.

      Oxygen masks system.

    • C.

      Engines' oil pressure switch.

  18. Q 18.

    WHICH STATEMENT ABOUT DRIVING THE PA SYSTEM LOUDSPEAKERS IS RIGHT?

    • A.

      Cabin and Att spkrs by main (120 W) amp, lavatory spkrs by aux (20W) amp.

    • B.

      Cabin spkrs by main, lavatory and att spkrs by aux.

    • C.

      Cabin and lavatory spkrs by main, att spkrs by aux.

  19. Q 19.

    THE AUDIO INTERCOM UNIT IS LOCATED:

    • A.

      E&E compartment 94VU.

    • B.

      E&E compartment, aft of forward pressure bulkhead.

    • C.

      Flight deck behind 3CM panel.

  20. Q 20.

    FLIGHT INTERPHONE AMPLIFIER IS LOCATED:

    • A.

      On 85VU.

    • B.

      On 96VU.

    • C.

      Inside the Audio Intercom Unit.

  21. Q 21.

    TO ESTABLISH A COMMUNICATION WITH FLT INT, WHICH STATEMENT IS WRONG?

    • A.

      The pilot sets the RADIO/INTER switch in INTER position and necessarily selects INT square key on ACP.

    • B.

      The pilot sets the RADIO/INTER switch in RADIO position and necessarily selects INT square key on ACP.

    • C.

      The pilot sets the RADIO/INTER switch in INTER position irrespective of square key selection.

  22. Q 22.

    THE GAIN OF THE PA AMPLIFIER IS INCREASED BY 6 DB:

    • A.

      When the aircraft is airborne.

    • B.

      When at least one engine is running.

    • C.

      When the aircraft is airborne and at least one engine is running.

  23. Q 23.

    CVR IS POWERED IF:

    • A.

      As soon as aircraft is powered up and until the power is available.

    • B.

      Aircraft is airborne.

    • C.

      Both engines running.

  24. Q 24.

    DURING THE FLIGHT THE PILOT:

    • A.

      Must not erase the CVR.

    • B.

      Is permitted to erase the CVR.

    • C.

      Can not erase the CVR.

  25. Q 25.

    IN ORDER TO ERASE THE CVR TAPE ENTIRELY IT IS NECESSARY TO:

    • A.

      Set the parking brake, and press erase button for at least 2 seconds.

    • B.

      Set the parking brake, and press erase button for at least 2 seconds when the aircraft is on the ground.

    • C.

      Set the parking brake, and press erase button for at least 2 seconds when the aircraft is on the ground and the CVR is powered somehow.

Answers and explanations are in mode.